ETA Systems ETA-C15D Руководство - Страница 4

Просмотреть онлайн или скачать pdf Руководство для Распределение питания переменного тока ETA Systems ETA-C15D. ETA Systems ETA-C15D 12 страниц. Eta systems power conditioner owner's manual

Печатать страницу

CAUTION – WHEN INSTALLING THE PRODUCT

• Plugging in or unplugging the power cord with wet hands may result in electric shock.

• Never move the unit with the power cord plugged into the wall, as damage to the power cord may result.

• When unplugging the cord from the wall, grasp the plug, NOT the cord.

• Never install this product in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke

or steam are present. Fire and electric shock may result.

• Keep all sides of the unit at least 3

WARNING – WHEN THE DEVICE IS IN USE

• To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to ETA

Systems.

• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from

the AC outlet and contact ETA Systems. Do not to attempt to continue operation of the product as this may cause fire or electric

shock.

• Smoke or strange smell coming from the unit.

• If the product falls or the case is damaged.

• If water or any metallic objects fall into the product.

• If the power supply cord is damaged in any way.

• If the unit is malfunctioning.

• Do not insert or drop metallic objects or flammable materials into the ventilation holes of the product's cover, as this may result in

electric shock or fire.

• Do not place any metallic objects or containers with liquid on the top of the product. If any liquid spills into the unit, fire or electric

shock may result.

• Never operate this product or touch the power supply cord during an electrical storm, electric shock may result.

• Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.

• Operate the product only with the voltage specified on the unit. Fire and/or electric shock may result if a higher voltage is used.

• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not place heavy

objects on the power cord, including the product itself, doing so may result in fire or electrical shock.

• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe as a catastrophic

disaster may result.

• Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property

damage.

CAUTION – WHEN THE DEVICE IS IN USE

• N ever place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and property damage. In

addition, the product itself may fall and cause injury and property damage.

• C ontact ETA Systems for instructions on cleaning the inside of the unit. Large accumulations of dust inside the unit may result in

heat buildup and fire.

• E nsure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate on the power plug or

inside the wall outlet.

• When cleaning the unit or the unit is not to be operated for an extended time period, unplug the power cord from the wall.

ETA-C15D

Power Conditioner

⁄

" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 4 –

Specifications are subject to change without notice.

ETAsys.com