DOCtron Instant Mastering Chain v 5.1.7 Руководство по настройке и эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по настройке и эксплуатации для Музыкальный микшер DOCtron Instant Mastering Chain v 5.1.7. DOCtron Instant Mastering Chain v 5.1.7 11 страниц.

Печатать страницу

DOCtron Instant Mastering Chain v 5.1.7 Руководство по настройке и эксплуатации

The EQ

THRESHOLD

The COMPRESSOR

RATIO

Ratio determines the ratio of uncompressed to compressed signal. 1: 1.5 is therefore a slight

compression, while 1:10 can be described as a very strong compression.

For sum compression in mastering, a slight compression of 1: 1.5 or 1: 2 is preferred.

ATTACK

Attack determines how fast the compressor should react. The shorter the selected time, the faster the

compression will affect the signal. The indicated time for the ATTACK switch is measured in

milliseconds (msec).

RELEASE

Release determines the time after which the compressor "releases" the signal again. The longer the

release, the longer it takes for the compressed level to return to an uncompressed state.

A special feature is the setting "AUTO". In this setting, the release time is automatically determined by

the applied signal. The compressor then adjusts the release time to the program material.

The indicated time for the REALEASE switch is measured in seconds (sec).

IMC5

The THRESHOLD determinate s the threshold where the compressor starts to

work. In full left position (+20 dB) the compressor won't work. A full right

position (-20 dB) means that all signals louder than -20 dB will be compressed.

With THRESHOLD one can establish how much compression should be present

in the audio-signal.

Threshold determines from which signal threshold the compressor should be

present in the audio-signal

The EQ allows to rearrange the pending signal in a wide

range. It is a shelving EQ changing the low signals

(approx 60 Hz) and high signals (approx 12 kHz). The

range is from -14dB to +14 dB for each frequency

range. By toggling the EQ-switch one can switch direct

both bands from 0dB (linear) to the selected range.

With this three switches one can

regulate the parameters of the

integrated compressor.