Etac Clean Series Инструкции по восстановлению
Просмотреть онлайн или скачать pdf Инструкции по восстановлению для Помощь в передвижении Etac Clean Series. Etac Clean Series 2 страницы.
Печатать страницу
Etac Clean
Reconditioning instructions
Clean
Reconditioning/reuse
The frequency of inspection/reconditioning depends on how often and how intensively the product is used. Always use Etac's original parts. For more information about the
product, refer to the manual available at www.etac.com.
Remember that the service life of the product is limited (see manual). This is particularly important when instructing users who are expected to use the product for an
extended period of time.
Cleaning
Washing and cleaning instructions for the product are found on the product
as well as in the product's manual. When cleaning the chassis in a washer,
the product must be secured in an upright position with locked wheels.
Reconditioning
Inspection
Chassis
Plastic back
Soft back
Clean 24"
The product can be safely cleaned at 85°C for 3 minutes.
Clean the product with a solvent-free cleaning agent with a pH level between
5 and 9, or with 70% rubbing alcohol.
Deviation
The chassis has paint damage
The chassis has mechanical damage which
can affect the product's function/safety
The plastic back is damaged, has cracks,
burrs or sharp edges
The plastic back is not secured
Screw cannot be tightened
The soft back is damaged, has tears, holes,
broken seams, broken snap locks
78673B 19-12-11
Solution
Repair the damage with Etac's touch-up paint.
RAL 9003 (Gloss 90)
Scrap the product
Replace the plastic back
Tighten all screws to 3 Nm torque
Replace plastic back
Replace the soft back
Clean HRB