Clinton CLASSIC 4-5501 Инструкция по сборке Руководство - Страница 4
Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Внутренняя отделка Clinton CLASSIC 4-5501. Clinton CLASSIC 4-5501 6 страниц. Staircases
Печатать страницу
6
For models 4-5080-30 & 4-5080-36
STRAIGHT CONFIGURATION.
Place the straight connecting back rails (S &
T) into position between the two sections and secure with
1-1/4" bolts and 3/4" washer in front of 7/16" locknut.
Fasten top of rail with 1-1/2" flat head wood screws.
7
For models 4-5080-30 & 4-5080-36
CORNER CONFIGURATION.
Position uprights K & L as shown in Corner
Configuration on page 1 (if staircase is in the straight
configuration, uprights K & L need to be repositioned for
corner setup). Place the corner connecting back rails (with
the mitre on one end O & P ) in a right angle position and
secure with 1-1/4" bolts and 3/4" washer in front of 7/16"
locknut. Fasten top of rails with 1-1/2" flat head wood screw
on down rails.
FOR SAFETY PURPOSES, TAKE TIME TO CHECK ALL BOLTS AND NUTS TO INSURE THAT
THEY ARE SECURELY TIGHTENED AND THAT THE ENTIRE STAIRCASE HAS BEEN PROPERLY ASSEMBLED
ACCORDING TO THESE INSTRUCTIONS. INSPECT FASTENERS PERIODICALLY.
8
For models 4-5080-30 & 4-5080-36
CORNER CONFIGURATION.
At back of staircase where handrails form a right
angle, fasten with 1-1/2" flat head wood screws as shown.
9
For models 4-5080-30 & 4-5080-36
CORNER CONFIGURATION.
Where front uprights come together, inset
corner configuration top rail right angle insert and fasten
with 1-1/4" bolts and 3/4" washer in front of 7/16" locknut.
Fasten top of rail with 1-1/2" flat head wood screws.
FOR ALL MODELS
10
Clean with disinfectant according to Cleaning
Guidelines prior to use.