Clinton 84200 Руководство пользователя - Страница 8

Просмотреть онлайн или скачать pdf Руководство пользователя для Медицинское оборудование Clinton 84200. Clinton 84200 11 страниц. Bariatric open base power tables combine load and force capacity: 550 lbs. (249 kg)

Печатать страницу

PREVENTIVE MAINTENANCE & PARTS REPLACEMENT

PERIODIC INSPECTION

• Inspect all electrical cords and connections for damage or wear.

• Check that all fasteners are in place and securely fastened.

• Make certain that the hi-lo function of the table is in proper working condition.

• Check to ensure that the table has remained level.

BACKREST CYLINDER REPLACEMENT

The backrest cylinder is replaceable in the field by following these simple directions below.

Tab

Cylinder Pin

Remove cotter pin. Then remove

the slide-out pin. Position tab

located on the adjustment bar

against cylinder pin.

CLEANING

METAL

Metal frame and stirrups (if applicable) should be cleaned according to facility antimicrobial standards and dried

with a clean soft cloth. Never use abrasive cleaners or scrubbing implements on painted surfaces.

UPHOLSTERY

Clinton uses only premium vinyl for upholstery, however, care should be taken when cleaning to ensure that the

upholstery or color is not affected by the cleaning agent. Use only mild cleaning agents on upholstery. Clinton

recommends using a 1 to 1 mix of ammonia and water or a 1 to 4 mix of bleach and water. Rinse thoroughly

with clean water and pat surface dry. This is not a guarantee and does not relieve the user from responsibility of

the proper and safe use of all cleaning agents. Test on inconspicuous area prior to using any cleaning agent on

upholstery's visible surface. Certain cleaning agents can be harmful to the surface.

WARNING:

according to standard procedures of your particular healthcare or therapy facility. Although Clinton

recommends a cleaning solution it is not a guarantee that it will meet with your facility's standards

or state, federal and local standards for treatment and cleaning of areas and equipment that may be

exposed to pathogens and infectious materials.

(Models 84200 & 84430 only)

Align holes in cylinder bracket with holes in table bracket by

adjusting the angle until the holes line up. Install slide-out pin

through holes and replace cotter pin.

Always clean surfaces that come in contact with pathogens or infectious materials

Finished view of cylinder assembly.