Cannondale Alloy Road Rim Краткое руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Велосипед Cannondale Alloy Road Rim. Cannondale Alloy Road Rim 16 страниц.

Step 3. Install your front wheel.

Lift the front of the bike and roll the front wheel in-between the brake

pads with the lever head on the left side of the bike. Carefully align

and lower the fork onto the wheel axle. Ensure the brake pads are in-

line with the rim and the wheel axle is fully seated in the fork dropouts.

While holding the lever head of the skewer, begin tightening the

adjusting nut in a clockwise direction. Remember, "righty tighty".

Close the lever. If you don't feel significant tension when the lever is

closed, open the lever and continue tightening the adjusting nut until

adequate tension is achieved. When properly tightened, the lever

should leave a mark in your hand.

Close the cable release at the brake caliper, then remove any additional

packaging from the bike.

SET-UP

STEP 1

STEP 2

STEP 3

STEP 4

PRE-RIDE CHECK