Doerr SnapShot Mobil Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для IP-камера Doerr SnapShot Mobil. Doerr SnapShot Mobil 6 страниц.

Печатать страницу

SnapShot Extra / Extra black

SnapShot Mobil / Mobil black 5.1

Instruction Manual

Flash

Infrared

PIR Sensor

ON/OFF Switch

Lens

Quick Guide

1) Open the camera using the lateral brackets

2) Make sure that the camera is always switched "OFF" , when changing batteries or SD card

3) Insert 12 x AA/1,5 V batteries (mind polarity)

4) Insert unlocked SD card

5) Move "ON/OFF" switch to "setup" position. Display shows settings and real time images

• Camera symbol

Single shot mode

• 5M

Resolution 5 Mega Pixels

• Battery symbol

Battery status

• SD Memory Card Symbol

SD Memory Card is inserted

• [00034/00965]

Stored pictures / free capacity

Setup

In order to change settings switch to "setup" and press menu. A list of various menu items appears.

Camera settings (CAM)

Camera Mode:

choose between photo or video ( ,  , ok)

Resolution:

either choose 3M or 5M or 8M or 12M ( ,  , ok)

Number of shots: choose 1 to 3 shots per motion ( ,  , ok)

Video quality:

select VGA quality (640x480 pixels) or QVGA (320x240 pixels) ( ,  , ok)

Video length:

can be set from 1 up to 60 seconds ( ,  , ok)

Motion Detector Settings (PIR)

PIR sensitivity:

choose the sensitivity (high, normal, low) or turn sensor off ( ,  , ok)

PIR Interval:

Select time (1 sec to 60 min) when PIR sensor is deactivated after a shot. If camera is in send mode, please make sure that

you allow an interval of at least 3 minutes, because the camera needs this time frame in order to send the picture.

Time Interval:

Set time interval of camera. Shoots photos during time set (5sec to 8h) If set "OFF" the camera triggers upon motion

Timer:

Camera is on standby mode during desired time. Outside this time camera does not take photos and does not react to motion

(same for "timer interval" mode ). After setting time camera only works during time frame.

GSM Setup (available for camera models Mobil and Mobil black only)

In order to setup the GSM functions both, SIM and SD card have to be inserted. The data such as address,

cell phone number and GSM and MMS parameters can easily be setup on the PC!

DÖRR GmbH • Postfach 1280 • 89202 Neu-Ulm/Germany • Fon +49 731 97037-0 • Fax +49 731 97037-37 • [email protected]

SIM Card

Slot

2" Colour

Display

USB

External

SD Memory

V- Connection

Card Slot

1) Press  and  to select between the registers (CAM, PIR, SYS), register (GSM) only in MOBIL versions

2) Press  and  to select a menu item within the registers

3) Press  and  to change the menu items

4) Save settings with the "ok" button and leave setup with "menu" button

Battery

Compartment