DOF Reality M2 Инструкции по настройке

Просмотреть онлайн или скачать pdf Инструкции по настройке для Аксессуары для видеоигр DOF Reality M2. DOF Reality M2 14 страниц.
Также для DOF Reality M2: Инструкции по настройке (15 страниц)

Печатать страницу

During initial assembly don't tight bolts completely, do it at the end. First you need to assemble

full frame and fight screws and bolts after.

The following arrow highlights the spot on the diagram or details that you need to pay extra

attention:

If you use a flight simulator, then in the settings Axis Assignments - instead Extra1 (Traction

Loss) must be used Yaw effect

Please check and if needed put back the motors power and sensors plugs as they were to match

the colors. This is very important. Never change wiring. Mixed of colors in connectors can damage the

motors and platform controllers. If you think that you need to reverse one or more motors, do it in

SimTools software.

Don't put ANY controllers on the platform before it is completely tested and proven to be

working as desired. After assembly attach the seat only. Nothing extra. When you ensure proper

behavior start adding controllers one by one, doing movement tests with person seating at the pilot seat

after implementing each new add on to platform weight.

Setup Instructions DOF Reality M2