Cygbot CygLiDAR D1 Руководство пользователя - Страница 14
Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Cygbot CygLiDAR D1. Cygbot CygLiDAR D1 20 страниц.
Печатать страницу
8. CygLiDAR Viewer
Serial Port
1)
- Select a baud rate and a serial port to use.
Device
2)
- Check on the release version of the latest update to CygLiDAR firmware and hardware.
- Set up a device model and a display mode.
3D Pulse Duration Control
3)
- Choose Auto and press Apply for a completion of Auto mode.
- Choose Manual, put a preferable value for the duration to send and press Apply.
(The duration is +0 to the minimum and +10000 to the maximum available to apply.)
Frequency Channel
4)
- Assign a channel restricted from +0 to +15 for light sources.
Sensitivity Level
5)
- Provide a specific level of the detection sensitivity, ranging from +10 to +100.
Color Scheme
6)
- Set a color scheme of the following scales: Hue, RGB or Grey (Image samples on
14
Ver 0.2.2
page
17).