Cygnett V-PRO TRAVEL Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для сотовых телефонов Cygnett V-PRO TRAVEL. Cygnett V-PRO TRAVEL 2 страницы.
Печатать страницу
A
B
C
D
E
F
G
H
M
I
J
A
LED ring light
B
Device holder
C
Pan/tilt ball joint
D
Tightening screw
E
Metal tripod stand
F
LED ring light controller
G
Increase brightness
H
Colour mode switch
I
Power button
J
Decrease brightness
Installation
1.
Loosen the tightening screw (D) and open up the metal tripod stand (E).
2.
Tighten the screw (D) at the desired position.
3.
Install the pan/tilt ball joint (C) onto the stand.
4.
Install the LED ring light (A) onto the pan/tilt ball joint (C).
5.
Install the device holder (B) onto the LED ring light (A).
6.
Connect the LED ring light controller's (F) USB-A end into a compatible
USB-A wall charger. For optimal user experience, use a wall charger that
supports up to 13.5W on a 5V supply.
7.
Press the power button (I) to turn on the LED ring light.
A 1/4" thread adapter has been included. Swap this out with the device
holder (B) should you wish to install a camera within the LED ring light.
Bluetooth Instructions
Turn on the Bluetooth remote by switching the button on the side of the
remote to 'ON'. Go into your device's Bluetooth settings and connect to
'Cygnett BT'. Use the corresponding shutter button on the remote to take an
image whilst in your camera app. Compatible with Android 4.2.2 OS or
newer, and iOS 6.0 or newer.
Colour Modes
The LED ring light has three different colour temperatures: warm white,
neutral white and cool white. Change between these modes by pressing the
colour mode switch (H).
Brightness Levels
To increase the brightness of the LED ring light, press the increase brightness
button (G) on the remote. To decrease the brightness of the LED ring light,
press the decrease brightness button (J) on the remote.
Adjusting the Height
Adjust the height of your stand by loosening and tightening any of the
three tightening screws found along the metal pole.
press the decrease brightness button (J) on the remote.
Product Specifications
Name
V-Pro Travel
Item Number
CY3443VCSLR
Input Power
5V⎓2.7A (13.5W)
Light Mode
Warm White
Neutral White
Cool White
Power Supply
USB 5V
Device Width (mm)
60 – 85
FCC ID
2AEDZCYG2
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generations, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to connect
the interference by one or more of the following measures:
-
Reorient or relocate the receiving antenna.
-
Increase the separation between the equipment and receiver.
-
Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-
Consult the dealer or an experienced radio/TV technician for help