Cygnus electronics ER-601A Краткое руководство по эксплуатации
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Замки Cygnus electronics ER-601A. Cygnus electronics ER-601A 2 страницы. Electric lock
Печатать страницуElectric Lock
ER-601A
Our electric lock,with the function :Lock status self-inspecting,wrong operation
self-correcting,feature at high sensitivity,low voice,high-security.is the new generation of
intelligent door locks.
A.Features
The length of bolt ≧ 20 mm,meet the standard of GA/T73-94 5.1.6 B;
Can work compatible with building intercom, access control systems;
If artificially open,the bolt will pull back automatically;
This lock is suitable for left, right, open, Inward and outward door;
Wrongly opening,the lock will lock in 5-8 seconds automatically;
Voltage: DC12V - 18 v, current < 350 ma;Static<350mA, Standby Current is 25mA, time
for opening is less than 1s;
Working life (more than 500000 times), high sensitivity, low power consumption.
B.Installation
Install the lock according to the install diagram.
1.Install the bolt:check the consistency between the latch and the bolt, make sure the
depth of the latch more than 10mm.
2. Install the lock body (locks should be in the state of open);
Install lock pin (lock should be in the state of open);
3.Below is the wiring diagram:
Note:The logo above is the same as the circuit abroad of the lock.
A. if you want to connect the positive
"L -" and "GND" with A short wires, otherwise it cannot control the lock;(Please check the
wiring diagram --A )
side to open the lock :please connect the contact