Cygolite Metro 300 Руководство по эксплуатации

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для велосипедов Cygolite Metro 300. Cygolite Metro 300 2 страницы. Super bright led bicycle lighting system

Печатать страницу

Metro

420 / 300

Super Bright LED Bicycle Lighting System

with USB rechargeable Li-Ion battery

OPERATION MANUAL

Congratulations on your purchase of the Metro high-brightness LED

headlight system. Please refer to this guide to operate your Metro

safely and properly.

FEATURES

• Ultra bright 420 & 300 lumen outputs

• Precision optics

• 5 Lighting modes

(Med > Hi > Low > 2-in-1 Steadypulse

> Day Flash)

• Internal USB rechargeable Li-Ion battery

• Side illumination ports for added visibility

• Water resistant design

• Feather-light 110 grams

• Locktite

tool-free handlebar mount

CONTENTS

• Super bright LED Headlight

• USB cable

• Handlebar bracket

CAUTION:

· Headlight may get hot during use. Use caution when handling.

· Unplug the headlight from charger when not in use.

· Unplug connectors by the plug, never by the cable.

· Do not modify or substitute any parts with non-Cygolite parts.

· Do not open headlight case.

· Provide adequate airflow to the headlight to cool during use.

· If the light is on & stationary longer than 10 minutes, turn it off.

· Do not look directly at light.

· Do not operate or submerge under water.

· Do not operate the light unattended.

· Keep headlight away from combustible materials.

· Do not package headunit when hot or immediately after use.

· Carrying a flash light is recommended.

· This light is for bicycle use only.

· State laws regarding flashing bicycle lights may vary among states. Use the flashing

modes in accordance to your local state laws as well as federal law.

HEADLIGHT OPERATION

The Metro features 5 light settings controlled by the power button. During

use, the power button will illuminate to show the power is on. The diagram

and instructions below indicate where the light features are located on the

headlight.

CAUTION: The light may get hot during use. Handle with care and turn

light off if stationary for more than 10 minutes.

USB port

Side Illumination ports

OPERATION

1. Press power button to operate the light. The light will turn on and the

power button will illuminate.

2. Press power button to scroll through the different settings.

3. Hold the power button for 2 second to turn the light off.

LIGHT MODE MEMORY

For convenience, the Metro memorizes the last mode used before it is

turned off. When it is turned back on, it will turn on in that mode.

LIGHT SETTINGS

Med > High > Low > 2-in-1 Steadypulse > Day Flash

2-in-1 Steadypulse setting combines steady brightness to see and

alerting flash to be seen into one setting. It is made especially for riding

at night in high traffic areas.

SIDE ILLUMINATION PORTS

During use, the side ports will illuminate to provide added side visibility to

adjacent motorists and traffic.

LOW BATTERY

If the light dims dramatically during use, the battery is near empty. At this time

we recommend stop using the light and recharge it immediately.

MOUNTING ON HANDLEBARS

The Locktite

handlebar bracket has a tool-free design to let you mount

the bracket on the handlebar with ease while firmly staying in place

through all riding conditions.

1. Attach handlebar spacers to inside of handlebar bracket for standard

sized handlebars. Remove spacers for oversized handlebars.

2. Attach rubber pad to handlebar spacer (or handlebar bracket) for grip.

Attach Handlebar spacers

(for standard sized bars)

Power Button

(During use)

Solid = Light On

Rubber pad

3. Wrap bracket around handlebar, return thumbnut in slotted space, twist

thumbnut clockwise to tighten.

4. Slide headlight back into the bracket until headlight clicks into place.

5. To remove headlight, press the release tab on the bracket and slide the

headunit forward.

ADJUST THE SIDE-TO-SIDE BEAM DIRECTION

Swivel the headlight left to right to adjust the side-

to-side direction. If side swivel becomes loose,

tighten the swivel screw on the top of the bracket

with a philips screwdriver.

ADJUSTING THE VERTICAL BEAM DIRECTION

Twist bracket thumbnut counterclockwise to loosen

bracket. Rotate bracket around handlbar for

preferred vertical beam angle then tighten

thumbnut.

OPTIONAL MOUNTING

An optional helmet mount kit (Part No. HLMT-DCV6) is available for this

light. To order, call Cygolite customer service or order online at:

shop.cygolite.com

Release Tab

Thumbnut