Canoga Perkins 1040 Руководство пользователя - Страница 3
Просмотреть онлайн или скачать pdf Руководство пользователя для Шкаф Canoga Perkins 1040. Canoga Perkins 1040 6 страниц. Standalone
Печатать страницуModel 1040 Standalone Enclosure User Manual
The Model 1040 standalone enclosure, shown in Figure 1, supports one 5U-sized managed module.
Figure 1. Model 1040 Standalone Enclosure
The front provides two switches, five LEDs, one connector, and a slot for a module. The back
includes an AC power cord socket and the ALM IN and ALM OUT connectors.
Switch
F1/NRM/F2 for the module
HDX/FDX for 10BASE-T port
Note:
If the link partner is set to auto-negotiation, the link uses 10M and follows the HDX/FDX
switch setting for this port; otherwise, set this switch to match the other switch on the link.
LED
PWR
ALARM, MAJ and MIN
MIN
MAJ
Tx for 10BASE-T port
LNK/Rx for 10BASE-T port
Note:
To clear a latched Minor or Major alarm, push the ACK button.
Connector
ALM IN and ALM OUT, MIN and MAJ
10BASE-T
Setting
F1
Function 1, such as Local loopback
NRM
Normal operation; set this for most applications
F2
Function 2, such as Remote loopback
HDX
Half duplex
FDX
Full duplex
State
Off
No power
Green
Power is on
Off
Normal
Amber
Minor alarm
Red
Major alarm
Off
No transmission
Green blinking
Transmission activity
Off
No link
Green
Link is established at full duplex
Amber
Link is established at half duplex
Blinking
Data is received
Alarm status from another device (IN) and to
another device (OUT)
Half or full duplex Ethernet
EdgeAccess Model 1040
Selects
Definition
Provides
3