Cyklos GPM 450 SA Руководство по эксплуатации - Страница 10

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переплетная машина Cyklos GPM 450 SA. Cyklos GPM 450 SA 14 страниц. Semi-automatic creasing and perforating machine

Печатать страницу

7.2

Setting Number of Segments

Pressing the numeric icon under the "Number of creases" sign the displays the numeric keypad.

By pressing the relevant digit, the number of creases/perforations (segments) is set. The program

enables setting of up to 15 segments. The selection of number of segments is ended by pressing

the "Enter" key. The number of segments is now set.

Fig. 3: Setting screen

7.3

Setting Position of Segments

The position of the first segment is set as the distance from the edge of the sheet. The position of

each following segment is defined as its distance from the previous segment. The "no. +" and "no.

-" serve for the choice of required segment. Choose the segment number 1 and then press the

numeric icon under the word "length". A numeric keypad is now displayed. Use the numeric

keypad to set the distance from the edge of the sheet and press "Enter". The position of the first

segment is set. Choose the segment number 2 using the "no. +" key and then press the numeric

icon under the word "length" again. Use the numeric keypad to set the distance from the first

segment and press "Enter". The second segment is set. Set all the remaining segments the same

way. When all the segments are set, press the "Return" icon to go back to the main menu. The

machine is now ready to process the task.

7.4

Special Types of Folds

By pressing ">>>" icon in Setting screen we enter to screen where most common types of fold are

displayed (fig. 4). To achieve most common folds it is necessary to crease in certain distances like

1/2, 1/3 or 1/4 of the paper. By pressing appropriate icon we can easily achieve one of the most-

used folds. First, it is necessary to prepare the required sheet the same way as for the processing.

Then press the "1/2" icon (other fold types accordingly), followed by "<<<", "Return" and "Start"

icons. On main screen appears symbol of appropriate icon (1/2, 1/3, etc.). One sheet goes through

the machine, its length is measured and 1/2 of the length is calculated. The screen changes to the

Setting screen (fig. 3). The calculated length of the 1/2 is displayed in the "length" box. Then return

to the main screen and press the "Start" icon. We recommend to process only one sheet and

check the position of the 1/2, whether the distance was measured correctly. If the crease is not in

precisely in the required distance, return to the Setting screen and correct the distance manually.

All other folds work the same way.

Operating Instructions | GPM 450 SA