Dogtra 1210NCP Руководство по настройке кодов - Страница 2
Просмотреть онлайн или скачать pdf Руководство по настройке кодов для Средство для ухода за домашними животными Dogtra 1210NCP. Dogtra 1210NCP 2 страницы.
Печатать страницуCode setting guide for Dogtra 1210NCP / 1212NCP
1. Start with the receiver/collar turned off and the transmitter turned on.
On the front of the transmitter there is a NICK/CONSTANT toggle switch. Set this toggle
switch on the "N" position to synchronize the transmitter with the BLACK collar/receiver. Set
the toggle switch on the "C" position to synchronize the transmitter with the ORANGE
collar/receiver.
2. Select the intensity level 0 with the intensity selection dial on top of the transmitter.
3. Place the red dot on the back of the transmitter against the red dot on the Black or Orange
collar/receiver. Hold the two red dots together for several seconds, until the green LED on the
receiver/collar starts to blink rapidly, and then separate the two red dots.
4.
Hold the Black button and the Orange button on the left side of the transmitter
simultaneously down for 3 seconds or until the rapid green blink of the LED on the
receiver/collar resumes a slower pace. The code setting work is now completed
Dogtra-Europe
Immeuble Le Vauban
Parc d'activités de La Verrière
4 rue de Panicalé
78320 La Verrière, France
TEL: +33 (0) 130 62 65 65
FAX: +33 (0) 130 62 66 11
E-mail: [email protected]
NICK/CONSTANT Toggle Switch
Intensity Selection Dial
Black button and Orange button
on the left side of the transmitter
.