Dogtra 2700T&B Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными Dogtra 2700T&B. Dogtra 2700T&B 19 страниц. 1-dog system only training & beeper collar
Печатать страницу2. Transmitter Button Function
2700T&B
Locate
Pager
The transmitter for the 2700T&B has five buttons (two
on the face of the transmitter, two on the left side, and
one on the right side).
Nick Button
When the Nick button is pushed, the receiver emits a
single rapid pulse of electrical stimulation.
Constant Button
Pressing the Constant button gives continuous
stimulation as long as the button is pushed, for up to 12
seconds. If the button is not released after 12 seconds,
the stimulation will automatically turn off as a safety
feature. The collar will be ready to be reactivated once
the button has been released.
12
Beeper Pitch
Toggle Switch
Nick
Constant
On/Off
Button &
Mode
Beeper Pitch
Toggle Switch
Locate Button
The Locate button is located on the left side. It causes
the collar's beeper horn to emit a series of beeps when
held down and gives you the ability to keep track of your
dog's location. On one-dog models, the beeper can be
adjusted between high and low pitches.
Note: The high/low pitch is not an option on two dog
units. On two-dog models, the green collar emits the
high pitch and the orange collar emits the low pitch
automatically. The pitch cannot be changed.
Pager Button
The Pager button is located on the left side of the
transmitter. Pressing it will give a vibration for as long as
the button is pressed, for up to 12 seconds.
Mode Button
Your 2700T&B has three different modes: Locate, Run/
Point, and Point-Only. The Locate mode can be activated
at any time, even when another mode is set, by pressing
the top orange button labeled Locate on the left side
of the transmitter. To set the beeper unit to Run/Point
and Point-Only mode, press the black Mode button. This
button is located on the right side of the transmitter.
13