ASG TLB-D412PH Руководство - Страница 4
Просмотреть онлайн или скачать pdf Руководство для Мощная отвертка ASG TLB-D412PH. ASG TLB-D412PH 9 страниц. Tlb-d series. brushless electric screwdrivers
Печатать страницуInstallation Instructions
•
Use the power supply voltage recommended in the specification of this manual.
•
When using a commercial power supply be sure to set up circuit and safety
breakers. You must also properly ground the mechanisms.
•
The temperature and humidity should be kept at appropriate levels.
•
Do not set up the power supply in a room that has poor ventilation and where it
may be exposed to dust and metallic particles.
•
Do not put anything on top of power supply
•
Attach the power supply securely to a flat, stable surface.
•
Do not permit unauthorized personnel to operate this power supply.
•
Do not set up the power supply near any high voltage machinery
•
Avoid setting up or storing the power supply in wet or oily environments or where
it might be exposed to corrosive or flammable gases.
ASG, Division of Jergens, Inc.
S. Waterloo Road | Cleveland, OH
15700
44110-3898
| Phone: (
| Fax: (
| Email: [email protected] | Web: www.asg-jergens.com | Revision Date: 01/03/18
888) 486-6163
216) 481-4519
Panel Specifications
No.
Name
Function
1
3-Colored Light
To show operation is OK, NG, or the mode condition
2
Panel
To show set value, set screws number and other value
3
Power Switch
Push five seconds: to disable COUNTING FUNCTION CLEAR Push
three seconds: CLEAR
4
SELECT key
Push three seconds: Enter the selection
5
Up Key
When entering the selection, this key increases value
6
Down Key
When entering the selection, this key decreases value
7
Reset
Restore to factory settings
S+P
Automatic learning
UP+P
Waiting time mode
UP+DOWN
Buzzer mode
S+UP
If press together to enable P/R/S button, and then press again to
disable P/R/S button
4