Dohle ExOn7 Руководство по эксплуатации - Страница 6
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Сварочная система Dohle ExOn7. Dohle ExOn7 18 страниц.
Печатать страницу
Operating Instructions
Industrial Extruder DX315 ExOn7 3x400V
DOHLE
Display and control elements of front part of control unit
Temperature unit
AL (Alarm)
Shines if the alarm
exit is on
Controller – desired value setting
All controllers can be changed only in the desired value and are electrnically locked against
wrong inputs.
Change the desired value
The controller indicates actual and desired value temperature at the same time. To change
the desired value temperature proceed as follows:
Do not press these keys.
Downward - key
By every press of this key, the value
becomes smaller, which is indicated
on the desired value display. If this
key is kept constantly pressed, then
the value is sequentially becomes
smaller.
Actual value temperature
tettempevaluetemperatur
Downward - key
DOHLE Extrusionstechnik GmbH
Desired value temperatur
Upward - key
Upward - key
By every press of this key, the
value increases, which is indicated
on the desired value display. If this
key is kept constantly pressed,
then the value sequentially
becomes higher.
24