Dohrmann Enterprises DE-1000 Руководство пользователя - Страница 6
Просмотреть онлайн или скачать pdf Руководство пользователя для Измерительные приборы Dohrmann Enterprises DE-1000. Dohrmann Enterprises DE-1000 14 страниц. Phase noise analyzer
Печатать страницуDE-1000 Assembly & Installation Directions
Your Dohrect Enject Applicator requires minimal assembly. Your DE-1000 Applicator
comes in 2 separate assemblies.
1. Remove the tank and baseplate assembly from the box (Assembly 1).
2. Remove the cover and lift out the pump assembly (Assembly 2). This is the
black box with the power cord assembly and hoses attached.
3. Using the two 5/16" X 1" bolts provided, attach
the pump assembly to the baseplate (See
Figure 1).
assembly on the set of holes on the left of the
baseplate as shown in Figure 1. Connect the
input hose using the attached swivel nut to the
side output on the 3-Way Valve.
4. Remove the flush bottle assembly and slide
the flush bottle mount into the holder on the
right side of the tank. Connect the flush bottle
hose using the attached swivel nut to the top
input on the 3-Way Valve (see Figure 2).
Figure 2
FM-1000 Flowmeter and attach the flowmeter with the U-Bolt if mounting to a
railing. If mounting to a flat surface, use the self-tapping screws, or the ¼" nuts
and bolts provided. If using the self-tapping screws, drill a 3/16" hole. For most
accurate readings, the flowmeter needs to be mounted vertically.
adjustments assuring proper vertical installation you can loosen the bolts on the
swivel bracket, make the adjustments and then tighten the bolts.
Be sure to mount the pump
5. Mount the frame assembly on a
flat surface that can be easily
accessed, we usually recommend
the right fender on self-propelled
choppers.
1000 on a pull-type chopper, use
the CM-2 Chopper Mounting Kit.
Follow the installation instructions
that are included with the CM-2
Chopper Mounting Kit.
6. The FM-1000 Flowmeter should
be mounted in a location that is
easy to view for the operator. Find
a desired location to mount the
6
Figure 1
For mounting a DE-
To make