CYP CLUX-14S Руководство по эксплуатации - Страница 5

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаконвертер CYP CLUX-14S. CYP CLUX-14S 8 страниц. 1x4 hdmi splitter
Также для CYP CLUX-14S: Руководство по эксплуатации (8 страниц)

Печатать страницу

3.2 Rear Panel

HDMI IN

EDID

STD

1 EDID Control Jumper: Default factory setting is TV, leave as is if the

display is properly. Switch to STD to use built-in EDID if the display has

problems. When the EDID control jumper in TV selection, the unit will

detect the first HDMI output source's EDID and record in the unit. If the first

detected output source is DVI it will pass to next source, until the first HDMI

been detected.

2 HDMI Input: Connect input port to the HDMI or DVI output of your source

equipment such as DVD player or set-top-box.

3 HDMI Outputs 1 to 4: Connect each of the output ports to the HDMI

display. When more than one output connected, the HDMI outputs play

identical video signal simultaneously.

4 Power: Plug the 5V DC power supply into the splitter and connect the

adaptor to AC wall outlet.

HDMI OUT

DC 5V