3M Adflo PAPR Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Респираторный продукт 3M Adflo PAPR. 3M Adflo PAPR 3 страницы. Powered air purifying respirator papr assembly
Также для 3M Adflo PAPR: Инструкции пользователя (2 страниц)

Печатать страницу

Looking after

your 3M

Adflo

™

Powered Air Respirator

DO NOT:

Clean the Adflo filters. This is the most common mistake made by Adflo users, and can put your health (and back

pocket) at risk. See the warning from the Adflo instruction manual below:

"The particle and gas filters cannot be cleaned. Do not attempt to remove

contamination using for example compressed air as this will destroy the

filters, the equipment will not give the expected protection and the warranty

will be invalidated."

Adflo filters are built specifically to capture welding fume. High pressure compressed air can create holes in the

filter that, although not always visible to the naked eye, could compromise its level of protection. For example: holes

in the pre-filter and particle filter allow harmful particles to pass through to your airways.

Holes in the filter also create an opportunity for larger particles to enter the Adflo motor. This motor, if infiltrated,

could sustain damage that would not be covered under warranty.

So it's much more cost effective to simply replace your filters rather than try to clean them.

Pre-filter

(part no. 836010)

A1 Gas Filter

(part no. 837542)

Exclusive 3M Speedglas Agent

PO Box 912 • Artarmon NSW 1570 • Australia

™

Nuisance Level

Particle Filter

Gas Filter

(part no. 837010)

(part no. 837242)

Odour Filter

Replacement Pad

(part no. 837110)

(part no. 837120)

Australian Welding Supplies Pty Ltd

T: (02) 9439 0111

E: [email protected]

W: www.awsi.com.au

Further information and advice

To request a quote or place an order for spare parts, please contact AWS on

+61 (0) 2 9439 0111 or visit www.awsi.com.au. Please note that higher than

normal levels of pollutants, heat and sparks will require more frequent

replacement of components. If you require additional guidance, please check

the care and maintenance videos on our Youtube channel

(www.youtube.com/awsspeedglas) or contact your local AWS representative.