CYP PRO-H2SDI Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Медиаконвертер CYP PRO-H2SDI. CYP PRO-H2SDI 20 страниц. Hdmi to 12g-sdi converter
Печатать страницу6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
PRO-H2SDI
SERVICE
1
1
SERVICE Port: This port is reserved for firmware update use only.
2
SDI OUT LEDs: These LEDs will illuminate to indicate the SDI output
format currently in use.
3
PWR LED: This LED will illuminate to indicate the unit is on and
receiving power.
4
SCALE LED: This LED illuminate when the HDMI output is being
downscaled.
5
HDCP SRC LED: This LED will illuminate when the HDMI source
contains an HDCP encoded signal.
6
HDCP IN LED: This LED will illuminate to indicate that the HDMI input
supports HDCP sources.
7
SERVICE Button: Press this button to put the unit into its firmware
update mode.
Firmware Update Process: To update firmware after pressing the
button, connect the unit to a PC/laptop via the Micro-USB Service
port and the unit will appear as an external drive. Drag an appropriate
firmware file onto this drive and the unit will automatically begin
the update process. After the update completes, the unit will
automatically reboot.
8
SCALE Button: Press this button to enable or disable the HDMI
output's 4K to 1080p downscaling function.
Note: 3840x2160 will be downscaled to 1920x1080. 4096x2160 will
be downscaled to 2048x1080. YUV 4:2:2 format sources cannot be
downscaled.
3
2
SDI OUT
HD
3G
6G
12G
HDCP
SCALE
SRC.
IN
PWR
3
4
5
6
HDMI
L/R
SERVICE
SCALE
AUDIO
7
8
9
L/R
IN
10