CYP CMPRO-U4H4CVPL Руководство по эксплуатации - Страница 9

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор CYP CMPRO-U4H4CVPL. CYP CMPRO-U4H4CVPL 20 страниц. 4k2k 4×4 hdmi matrix over cat5e/6/7

CYP CMPRO-U4H4CVPL Руководство по эксплуатации

6.2 Rear Panel

1
A
CAT5e/6/7 OUT
IP
CONTROL
2
3
4
1
RS-232: Connect to a PC or control system with D-Sub 9-pin cable
for the transmission of RS-232 commands.
2
IP & CONTROL: This port is the link for Telnet or Web GUI controls,
connect to an active Ethernet link with an RJ45 terminated cable (for
further details, please refer to section 6.8 & 6.9).
3
SERVICE: Manufacturer use only.
4
CAT5e/6/7 OUT A~D: Connect from these CAT outputs to the CAT
input port of the receiver units with a single CAT5e/6/7 cable for HDMI
Audio/Video and IR/RS-232 control signal transmission.
5
IR IN 1~4: Connect to the IR extenders for IR signal reception. Ensure
that the remote being used is within the direct line-of-sight of the IR
extender for it will send out the IR signal to the selected receiver's
IR OUT.
6
IR OUT 1~4: Connect to the IR blasters for IR signal transmission.
Place the IR blaster in direct line-of-sight of the equipment to be
controlled for it will blaster out the IR signal received from the
receiver side choosen by input selection.
7
HDMI IN 1~4: Connect to the HDMI input source devices such as a
DVD player or a Set-top Box with HDMI cable or DVI to HDMI cable.
8
ALL IR OUT: Connect to the IR blaster for IR signal transmission to
the source side. Place the IR blaster in direct line-of-sight of the
equipment to be controlled for it will blaster out all signal received
from the IR IN at the receiver sides.
9
ALL IR IN: Connect to the IR extender for IR signal reception. Ensure
that remote being used is within the direct line-of-sight of the IR
extender for it will send out the signal to all receiver's IR OUT.
10
DC 24V: Plug the 24 V DC power supply into the unit and connect the
adaptor to an AC outlet.
Warning: Please do not connect the CAT5e/6/7 cable into the
receiver's LAN port.
5 6
5 6
B
1
2
IR IN
CAT5e/6/7 OUT
IR IN
IR OUT
HDMI IN 1
HDMI IN 2
4
5 6
5 6
3
4
C
IR OUT
IR IN
IR OUT
IR IN
IR OUT
CAT5e/6/7 OUT
HDMI IN 3
HDMI IN 4
7
4
8
D
ALL
IR OUT
GND
GND
2
1
4
3
V+
+
V
CAT5e/6/7 OUT
GND
IR IN
DC 24V
4
9
10
4