CYP CMSI-8H8CV Руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор CYP CMSI-8H8CV. CYP CMSI-8H8CV 20 страниц. Hdbaset 4x4/8x8 hdmi matrix over cat5e/6/7
Также для CYP CMSI-8H8CV: Руководство по эксплуатации (20 страниц)

Печатать страницу

CYP CMSI-8H8CV Руководство по эксплуатации

Once in the command line interface (CLI) type "telnet", then the IP

address of the unit and "23", then hit enter.

Note: The IP address of the Matrix can be displayed on the device's

LCM monitor by pressing the Menu button twice.

This will bring us into the device which we wish to control. Type "HELP"

to list the available commands.

Type "IPCONFIG" To show all IP conﬁ gurations. To reset the IP,

type "RSTIP" and to use a set static IP, type "SETIP" (For a full list of

commands, see Section 6.7).

Note: Any commands will not be executed unless followed by a

carriage return. Commands are case-insensitive. If the IP is changed

then the IP Address required for Telnet access will also change

accordingly.