CYP PU-424HBTL-KIT Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Матричный коммутатор CYP PU-424HBTL-KIT. CYP PU-424HBTL-KIT 20 страниц. 4 x 4 hdmi hdbaset™ lite matrix (with 2 simultaneous hdmi outputs) including 4x pu-514l-rx receivers

Печатать страницу

6. OPERATION CONTROLS AND FUNCTIONS

6.1 Front Panel

CMSI-424E

4X4 HDMI MATRIX

LCM : Displays the setting information of each input and output

setting.

IR: IR Receiver window (accepts the remote control signal of this

device only).

POWER: Press this button to power the device on/off. The LED will

illuminate green when the power is on, red when it is in 'Standby'

mode.

LOCK: Press this button to lock all the buttons on the panel; press

again to unlock. The LED will illuminate when locked.

Menu: Press once to select EDID setting from STD (internal) 1 or TV

(external) 2 then press it again to confirm the selection. Press the the

'MENU' button to confirm the input or output selection

1~4/A~D and Out/In: Press the Out or In button to select the output

or input mode and then press the required number or letter button to

change the selection.

For example, if outputs A~B need to be set to input 1 and outputs

C~D need to be set to input 2, then the following sequence of button

presses need to be performed:

Press: Out → A → B → In → 1 → Menu,

and then press: Out → C → D → In → 2 → Menu.

Note: If the menu button is not pressed the selection will not be changed.

POWER

LOCK

OUT