Ashcroft T2 Инструктивный лист
Просмотреть онлайн или скачать pdf Инструктивный лист для Передатчик Ashcroft T2. Ashcroft T2 2 страницы. Pressure transmitter
Печатать страницуG2 ELECTRICAL TERMINATIONS AND WIRING
DEUTSCH DT SERIES DT04-3P
Pin
Voltage
4-20mA
Mating
No.
Output
Output*
Cable Color
1 (B) Common
V
Black
–
2 (C) Output
V
–
White
3 (A)
V +
V
+
Red
1 (B)
* Use either V- termination on G2 with
4-20mA output
DEUTSCH DTM SERIES DTM04-3P
Pin
Voltage
4-20mA
Mating
No.
Output
Output*
Cable Color
1
V +
V +
Red
2
Common
V
Black
–
3
Output
V
–
White
* Use either V- termination on G2 with
4-20mA output
SHIELDED CABLE, PVC JACKET,
24AWG LEADS
Wire
Voltage
4-20mA
Color
Output
Output*
(27)
Red
V +
V +
Black
Common
V –
1.06
White
Output
V –
Bare**
Shield
Shield
Drain Wire
Drain Wire
IP67 Ingress rating
* Use either V- termination on G2 with 4-20mA output
M12 ELECTRICAL TERMINATION
FOR G2 (EW), (EO), (E2), (E1)
Pin 3
Mates to optional Hirschmann connector
Part 933 172-100 or equal
Pin
Voltage
4-20mA
Mating
No.
Output
Output*
Cable Color
1
V +
V +
Red
2
Case Grd.
Case Grd.
Green
Pin 4
3
Common
V –
Black
4
Output
V –
White
IP67 Ingress rating
6
G2 ELECTRICAL TERMINATIONS AND WIRING
FLYING LEADS 18AWG
3 (A)
Wire
Voltage
Color
Output
Red
V +
2 (C)
BlackCommon
V –
White
Output
IP67 Ingress rating
3
2
DIN 43650 FORM C (EN 175301-803-C)
ELECTRICAL TERMINATION
1
(DC), (N1), (N2), (N3), (N9)
Mates to Hirschmann P/N: GSSNR 300,
Ashcroft P/N 300A126-01
Pin
Voltage
4-20mA
No.
Output
Output* Cable Color
1
V +
V
+
2
Common
V
–
3
Output
IP65 Ingress rating
Connection - PIN
Vs +
1
V out
3
2
Vs -
T2 ELECTRICAL TERMINATIONS AND WIRING
M12 ELECTRICAL TERMINATION
FOR T2 (EW), (EO), (E2), (E1)
Mates to optional Hirschmann connector
Part 933 172-100 or equal
Pin
Voltage
4-20mA
No.
Output
Output*
1
V +
V +
2
Output
None
Pin 2
3
Case Gnd.
Case Gnd.
4
Common
Common
KEY
IP65 Ingress rating
Pin 1
T2 ELECTRICAL TERMINATIONS AND WIRING
DIN 43650 FORM A (EN 175301-803-A)
ELECTRICAL TERMINATION
4-20mA
(DN), (DO), (D2), (D1)
Output*
Mates to optional Hirschmann connector
V +
GDM 3009 or equal
V –
Pin
No.
1
2
Common
3
GND Case Gnd.
4-PIN BENDIX STYLE ELECTRICAL
TERMINATION (B4), (H1), (L1), (P2)
Mates to optional Amphenol Bendix connector PTO6A-8-
4-SR or equal
Pin
Mating
No.
A
Red
B
Black
C
Case Gnd.
White
D
Common
SHIELDED CABLE, PVC JACKET, 24
AWG LEADS, TERMINATION (F2), (P1)
Wire
Color
Red
White
Mating
Black
Cable Color
Green
Red
Bare**
White
Green
Black
** Where shielded wiring is being used; Connect the drain wire to the guard
terminal on the read out device or measuring instrument if available. In all
other cases connect to the ground of the power supply negative terminal.
© 2011 Ashcroft Inc., 250 East Main Street, Stratford, CT 06614 USA,
Tel: 203-378-8281, Fax 203-385-0402 www.ashcroft.com
All sales subject to standard terms and conditions of sale.
All rights reserved. I&M011-10129 03/2011 Rev. 10/2012, 07/13
Voltage
4-20mA
Mating
Output
Output*
Cable Color
V +
V +
Red
Common
Black
Output
None
White
Case Gnd.
Green
IP65 Ingress rating
Voltage
4-20mA
Mating
Output
Output*
Cable Color
V +
V +
Red
Output
None
White
Case Gnd.
Green
Common
Black
IP65 Ingress rating
Voltage
4-20mA
Output
Output
V +
V +
Output
None
Common
Common
Case Gnd.
Case Gnd.
Drain Wire
Drain Wire
IP65 Ingress rating
8
G2 & T2 PRESSURE TRANSMITTER
INSTRUCTION SHEET
WARNING! READ
BEFORE INSTALLATION
A failure resulting in injury or damage may be
1. GENERAL:
caused by excessive overpressure, excessive vi-
bration or pressure pulsation, excessive instrument
temperature, corrosion of the pressure containing
parts, or other misuse. Consult Ashcroft Inc., Strat-
ford, Connecticut, USA before installing if there are
any questions or concerns.
2. OVERPRESSURE:
capability of the transducer may cause irreversible
Pressure spikes in excess of the rated overpressure
electrical and/or mechanical damage to the pres-
Fluid hammer and surges can destroy any pressure
sure measuring and containing elements.
transducer and must always be avoided. A pressure
snubber should be installed to eliminate the damag-
ing hammer effects. Fluid hammer occurs when a liq-
uid flow is suddenly stopped, as with quick closing
solenoid valves. Surges occur when flow is suddenly
begun, as when a pump is turned on at full power or
Liquid surges are particularly damaging to pressure
a valve is quickly opened.
transducers if the pipe is originally empty. To avoid
damaging surges, fluid lines should remain full (if
possible), pumps should be brought up to power
slowly, and valves opened slowly. To avoid damage
from both fluid hammer and surges, a surge cham-
ber should be installed.
Symptoms of fluid hammer and surge's damaging
effects:
• Pressure transducer exhibits an output at zero
pressure (large zero offset).
• Pressure transducer output remains constant re-
gardless of pressure
• In severe cases, there will be no output.
FREEZING:
Prohibit freezing of media in pressure port. Unit
should be drained (mount in vertical position with
electrical termination upward) to prevent possible
overpressure damage from frozen media.
* Use either V- termination on G2 with 4-20mA output
1