CYP PU-22HC Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Переключатель CYP PU-22HC. CYP PU-22HC 16 страниц. V1.3 hdmi/cat6 to hdmi/ cat6 cascader
Также для CYP PU-22HC: Руководство по эксплуатации (10 страниц)

Печатать страницу

CAT6 IN: These slots are for connecting the Video/DDC input to the

⑤

Video/DDC output of the transmitter unit with CAT6 cables.

[Note]:

1. Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with

different speciﬁ cation may result in different distance.

2. Cable distance tested with equipment PS3 40G and 37" SamSung 12

bits LCD TV.

3. Figures provided in this manual are reference ﬁ gures only, actual ﬁ gures

may depend on source and display use with cable speciﬁ cation.

DC 5V: This is the slot where you insert the 5V DC power supply for

⑥

electrical power before plugging the adaptor to an AC wall outlet.

7.1 Rear Panel

CAT6 OUT: Connect the Video/DDC output to the Video/DDC input of

①

the receiver unit using CAT6 cables.

HDMI OUT: Connect HDMI output port to the HDMI display.

②

HDCP indicators: When the input source is with the HDCP protection the

③

HDCP LED will illuminate.

SYNC Indicator: The LED will illuminate when the HDMI or DVI source had

④

been connected.

HDMI/CAT6 input indicator: The LED will illuminate when the HDMI or

⑤

CAT6 source is selected.

Link OUT: The LED will illuminate when the display had been connected.

⑥

5 5