CYP PU-606PLBD-TX Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Приемник CYP PU-606PLBD-TX. CYP PU-606PLBD-TX 16 страниц. Hdbaset lite receiver with bi-directional poe & 2-way ir (up to 60m)
Печатать страницу
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Transmitter Front and Rear Panels
Front
IR2 Extender
RS232 In
IR1 Blaster
1
2
1
RS232 In: Plug the 3.5mm to D-Sub 9-pin female cable included in
the package and connect to a PC or laptop for RS-232 commands
transmission.
2
IR2 Extender: Connect to the supplied IR Extender cable for IR signal
reception. Ensure that remote being used is within the direct line-of-
sight of the IR Extender.
3
IR1 Blaster: Plug the IR Blaster included in the package for IR signal
sending from the Receiver side.
4
HDMI In: Connect with source equipment such as DVD/Blu-ray player.
5
DC 24V: Plug the 24V DC power supply into the unit and connect the
adaptor to an AC outlet. Only 1 side of device require power supply
when both Transmitter and Receiver obtain PoC function.
6
LINK LED: This LED will illuminate when the devices are connected
with a CAT5e/6/7 cable from the Receiver side. When the data
transmission accrue with error the LED will be blinking.
7
Power LED: This LED will illuminate when the devices are connected
with power supply.
8
CAT5e/6 Out: Connect to the Receiver unit with a single CAT5e/6/7
cable for transmission of all data signals.
8
HDMI In
3
4
Rear
7
DC 24V
Power
Link
Lite
CAT 5e /6 Out
5
6
8