CYP CH-1109TX Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Удлинитель CYP CH-1109TX. CYP CH-1109TX 12 страниц. Hdmi/ip over single cat5e/6 extender
Также для CYP CH-1109TX: Руководство по эксплуатации (16 страниц)

7. Operation Controls and Functions

7.1 Front Panel

Transmitter
HDMI to CAT5e/6 with LAN/PoE/IR CH-1109TX
Power
IR 1
IR 2
Blaster
Extender
③ ④
① Power LED: This red LED will illuminate when the power is connected with
AC wall outlet.
② DC 48V: These slots are where you plug the 48V DC power supply into the
unit and connect the adaptor to an AC outlet.
③ IR 1/2 Blaster: These slots are to connect with the IR blaster cables
included in the package for IR signal transmitting.
④ IR 1/2 Extender: These slots are to connect with the IR receiver cables
included in the package for IR signal receiving.
⑤ RS-232 In: This slot is to connect with PC/laptop with D-Sub 9 pin female
cable for RS-232 control system.
⑥ HDCP LED: This red LED will illuminate in when the input source signal
contains HDCP data.
⑦ Link LED: This yellow LED will illuminate when the both input and output
signal is connected.
⑧ Mode LED: This green LED will blinking when the device is processing data.
⑨ RS-232 Out: This slot is to connect to the device that wishes to be
controlled with D-Sub 9 pin female cable for RS-232 signal to be execute.
⑩ CAT5e/6 Out/IN: These slots are to be connected with a single CAT5e/6
cable for data transmitting.
Transmitter
CAT5e/6
RS-232
Out
In
HDCP
Link
Mode
Receiver
CAT5e/6 to HDMI with LAN/PoE/IR CH-1109RX
Power
IR 1
DC 48V
Extender
Blaster
①② ④ ③
4
IR 2
RS-232
Out
HDCP
Link
Mode
Receiver
CAT5e/6
In