CYP PU-506-KIT Руководство по эксплуатации - Страница 9
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Удлинитель CYP PU-506-KIT. CYP PU-506-KIT 16 страниц. 3-play hdbaset extender kit (2-way ir, rs-232 & hdmi, up to 100m)
Также для CYP PU-506-KIT: Руководство по эксплуатации (16 страниц)
Печатать страницу
6.2 Receiver Front and Rear Panels
Front
2
DC 5V
Power
Link
1
3
1
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to an AC outlet.
2
Power LED: This green LED will illuminate when the device is
connected to a power supply.
3
Link LED: The yellow LED will illuminate when both the input and
output CAT5e/6/7 signals are connected.
4
CAT5e/6 In: Connect to the transmitter unit with a Single CAT5e/6/7
cable for transmission of all data signals.
5
RS232 Out: Connect to the device that is to be controlled (with
the supplied 3.5mm mini-jack to D-sub 9-pin adaptor) by RS-232
commands.
6
IR1 Extender: Connect to the supplied IR extender cable for IR signal
reception. Ensure that the remote being used is within the direct line-
of-sight of the IR extender
7
IR2 Blaster: Connect to the supplied IR blaster cable for IR signal
transmission. Place the IR blaster in direct line of sight of the
equipment to be controlled.
8
HDMI Out: Connect to a HDMI equipped TV/monitor for display of the
HDMI input source signal.
CAT 5e /6 In
4
Rear
IR1 Extender
RS232 Out
IR2 Blaster
5
6
7
HDMI Out
8
9