CYP CPRO-2E Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кабели и разъемы CYP CPRO-2E. CYP CPRO-2E 11 страниц. 1 by 2 / 1 by 4 / 1 by 8 hdmi splitter
Печатать страницу
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
Example Shown: 1 by 8 HDMI Splitter
EDID
OUTPUT
STD
TV
2
1
1
EDID STD/TV: The default factory setting is TV, when in this mode,
the unit will detect the first HDMI output source's EDID setings and
record in the unit's memory. If there are any audio or video issues
then switch the unit to STD mode and power cycle it, the device
will scan input source's EDID and provide the highest common
settings to output displays.
Note: This function is not available in the 1×2 model
2
HDMI OUTPUT
Connect each of the output ports to the HDMI display for
simultaneous HDMI distribution.
6.2 Rear Panel
Example Shown: 1 by 8 HDMI Splitter
SERVICE
OUTPUT
7
1
1
SERVICE: Manufacturer use only.
2
HDMI OUTPUT: Connect each of the output ports to the HDMI
display for simultaneous HDMI distribution.
3
SYNC LED: The LED will illuminate when the HDMI source signal is
connected to the input port.
4
HDMI INPUT: Connect the input port to the HDMI or DVI output of
your source equipment such as DVD player or set-top box.
5
POWER LED: The power LED will illuminate when the unit is powered.
6
DC 5V: Connect the 5V DC power supply into the splitter and Plug
the adaptor to AC wall outlet.
OUTPUT
OUTPUT
3
2
OUTPUT
SYNC
8
2
3
OUTPUT
4
5
INPUT
4
CPRO-8E
OUTPUT
4KX2K SPLITTER
6
OUTPUT
POWER
DC 5V
1
2
5 6
2