CYP PU-Q1H8C Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Кабели и разъемы CYP PU-Q1H8C. CYP PU-Q1H8C 12 страниц. Cyp pu-q1h8c distribution amplifier
Также для CYP PU-Q1H8C: Руководство по эксплуатации (16 страниц)
Печатать страницу
5.2 Rear Panel cont'd
4. System reset function: It is suggested that this function is switched OFF,
except when doing system reset. By switching this ON the system will
reset TV to HDMI Input within 8~10 minutes. Switching to OFF means CEC
bypass.
Note: The system reset function will only operate when the display has built-in CEC functionality.
5. HDMI input: This slot is for connecting the source equipment with HDMI
cables.
6. HDMI output: This slots is for connecting the display with an HDMI cable.
Note:
• Cable tested with CAT-6E / 23AWG / Solid and therefore, cable with different specification may result
in different distance.
• Cable distance tested with equipment PS3 40G, and 37" SamSung 12 bit LCD TV.
• Figures provided in this manual are reference figures only, actual figures may depend on source and
display use with cable specification.
7. Video/DDC 2~8: These slots allow you connect to the HDMI displays to the
CAT6 to HDMI receiver. When more than one output is connected, the HDMI
outputs play an identical video signal simultaneously.
8. Power: This slot is to plug the 5VDC power supply included in the package into
the unit and connect the adaptor to an AC wall outlet.
Page 5