Cypress CAPSENSE EXPRESS CY3218-CAPEXP1 Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Материнская плата Cypress CAPSENSE EXPRESS CY3218-CAPEXP1. Cypress CAPSENSE EXPRESS CY3218-CAPEXP1 20 страниц. Capsense express evaluation kit
Также для Cypress CAPSENSE EXPRESS CY3218-CAPEXP1: Краткое руководство по эксплуатации (2 страниц)
Печатать страницу
Getting Started
1. Review Kit Contents
2. Explore the Board
3. Install Software
4. CY3218-CAPEXP1 Board Features
5. Tune the CY3218-CAPEXP1 CapSense Express Board
6. Create a CY3218-CAPEXP1 CapSense Express Project
7. Additional CapSense Resources
1. Review Kit Contents
Each CY3218-CAPEXP1 CapSense Express Evaluation Kit contains:
CY3218-CAPEXP1 CapSense Express Evaluation Board
■
Kit CD, which includes:
■
PSoC Programmer
❐
.NET Framework 2.0 (for Windows 2000 and Windows XP)
❐
PSoC Express 3
❐
CapSense Express Extension Pack
❐
CapSense Express Documentation
❐
Retractable USB Cable (A to Mini-B)
■
PSoC CY3240-I2USB Bridge Board
■
AAA Battery
■
2. Explore the Board
Caution: Do not touch the board anywhere other than the edges or the
buttons. Touching the board in the wrong area could lead to a short and an
unresponsive board. If this happens, follow the instructions in Section 2 to reset
the power to the board.
2.1. Insert the AAA battery into the battery holder on the back of the board.
2.2. Remove the jumper from J2 (back of board, left side, center).
2.3. Touch a button on the board. The LED in the center of the button and the LED above the
button lights up.
2.4. Press the mechanical button at the bottom of the board. The three LEDs above the but-
tons turn on.
2.5. Turn the board off by replacing the jumper on J2. Note that replacing the jumper disables
battery operation.
Page 2