Cypress CY3203-CapSense Краткое руководство по эксплуатации - Страница 13

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Материнская плата Cypress CY3203-CapSense. Cypress CY3203-CapSense 20 страниц. Psoc express

Печатать страницу

Program the CY3203 Board

3.19. Connect your computer to the CapSense test board ISSP Connector (J2)
MiniProg and a USB cable.
If this is your first time using the MiniProg, you will need to install the driver before proceeding. Follow the
instructions in the
3.20. In PSoC Express, select PSoC Programmer from the Programmer menu. The PSoC Programmer
application opens.
3.21. From the Port menu, select MiniProg1/<Identification Code>.
3.22. Click Program.
"Programming Succeeded..." appears in the Actions pane when programming is complete.

Test the Board

3.23. Click Toggle Device Power.
3.24. Touch the slider on the board with your finger. The LCD displays the position of your finger.
3.25. When you are done experimenting, click Toggle Device Power, and close PSoC Programmer.
3.26. Return to PSoC Express and select File

What's Next?

You have now completed the PSoC Express CapSense project. The next example walks you though adjusting
the settings so the slider is not as sensitive, a process know as tuning.
CY3203A-CapSense Quick Start Guide, Spec. # 001-17826 Rev. *A
Power the Board section on page
→
7.
Save Application.
Create a CapSense Project
using the PSoC
13