Cypress CY8CKIT-002 Руководство к набору - Страница 9

Просмотреть онлайн или скачать pdf Руководство к набору для Материнская плата Cypress CY8CKIT-002. Cypress CY8CKIT-002 16 страниц. Psoc miniprog3 program and debug kit guide

Печатать страницу

2.4

MiniProg3 LEDs

MiniProg3 has five indicator LEDs that, when lit, indicate the following:

Upper Left - Busy (Red): An operation (such as programming or debugging) is in progress.

■

Lower Left - Status (Green): The device is enumerated on the USB bus. When flashing, this

■

LED indicates that MiniProg3 has received USB traffic.

Upper Right - Target Power (Red): MiniProg3 is supplying power to the target connectors. This

■

LED does not light up if power to target connectors is supplied by a source other than MiniProg3.

Lower Right - Aux (Yellow): Reserved for future use.

■

Middle - No Label (Yellow): Flashes briefly during the initial configuration of the device. If it stays

■

lit, this LED indicates that a configuration error has occurred. If this happens, disconnect the

MiniProg3 from the USB port and then reconnect it.

CY8CKIT-002 PSoC® MiniProg3 Program and Debug Kit Guide, Doc. # 001-59350 Rev. *I

Installing MiniProg3