Cypress S6SBP401AJ0SA1001 Руководство - Страница 2
Просмотреть онлайн или скачать pdf Руководство для Материнская плата Cypress S6SBP401AJ0SA1001. Cypress S6SBP401AJ0SA1001 2 страницы. 6-ch automotive adas pmic evaluation kit
Печатать страницуS6SBP401AJ0SA1001 6-CH AUTOMOTIVE ADAS
VOUT1 (1.250 V)
VOUTL1 (3.300 V)
VOUTL2 (2.800 V)
VOUT4 (3.375 V)
Setup
*
1 Connect VIN to a power supply and GND to the ground.
2 Connect EN1, EN2, EN3, EN4, ENL1, and ENL2 to VIN.
3 Connect each output, VOUT1, VOUT2, VOUT3, VOUT4, VOUTL1,
and VOUTL2 to a voltmeter.
Check
*
1 Apply 5 V to VIN.
2 Each output voltage should be as shown in the gure above.
Do not supply power to VIN until the setup is completed.
*
For the latest information about this kit and hardware les,
visit
www.cypress.com/S6BP401AJ0/Kit-User-Guide
© 2017 Cypress Semiconductor Corporation, All rights reserved.
All trademarks or registered trademarks referenced herein are the
properties of their respective owners. Doc.# 002-19646 Rev.**
PMIC EVALUATION KIT
VOUT2 (1.250 V)
GND
VIN (5 V)
EN1
EN2
EN3
EN4
ENL1
ENL2
VOUT3 (1.850 V)