Cypress CYUSB3ACC-004A Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Компьютерное оборудование Cypress CYUSB3ACC-004A. Cypress CYUSB3ACC-004A 2 страницы. Interconnect board for on semiconductor image sensor
Печатать страницуCYUSB3ACC 004A INTERCONNECT BOARD FOR
ON SEMICONDUCTOR IMAGE SENSOR QUICK START GUIDE
3. Set the Jumpers on the boards as shown below
ON Semiconductor Image Sensor Board
(MT9M114_55CSP_HB_DEMO3_REV0)
Jumper/
Header No.
Header Name
P1
P2
P4
P5
P6
P7
P8
P11
P15
I2C connector
P32
CLOCK SELECTION
4. Learn to use FX3 in applications involving image sensors with the
application note
with EZ-USB
www.cypress.com/AN75779.
to stream video from the Image Sensor to a PC using FX3
For the latest information about this interconnect board and to download the
hardware les, visit
For the latest information about EZ-USB FX3 SuperSpeed Explorer Kit
(CYUSB3KIT-003) and to download Kit Software and Hardware les,
visit
www.cypress.com/SuperSpeedExplorerKit
© 2019 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the
properties of their respective owners. Doc.#: 002-26891 Rev **
Arrow.com.
Downloaded from
Jumper/
Jumper Setting
OE_L
CONFIG
FLASH
Open
TRST
SADDR
+VDDIO
UART
Open
EEPROM
Closed (A1 column)
1−2 & 3−4
3−5 & 1−2
AN75779 - How to Implement an Image Sensor Interface
FX3
in a USB Video Class (UVC) Framework
®
TM
www.cypress.com/CYUSB3ACC-004A
Cypress EZ-USB FX3 Superspeed
Explorer Kit (CYUSB3KIT-003)
Jumper/
Header No.
J2
1-2
J3
2-3
J4
J5
1-2
1-2
2−3
Refer to sections 6 to 8 for the instructions
Note:
Please take care when removing the
interconnect board from the SuperSpeed
Explorer Kit board
The suggested removal method is
shown in the picture. Hold the
interconnect board and use a rocking
motion to separate the boards safely
Jumper/
Jumper
Header Name
Setting
VIO1_3
Closed
VBUS_JUMPER
Closed
PMODE
Closed
SRAM_ENABLE
Open
available at