Ashly MX-206 Руководство по эксплуатации - Страница 6

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Музыкальный микшер Ashly MX-206. Ashly MX-206 12 страниц. Stereo microphone mixer
Также для Ashly MX-206: Руководство по эксплуатации (12 страниц), Технические примечания и спецификации (2 страниц), Руководство по эксплуатации (8 страниц), Руководство по эксплуатации (9 страниц)

Печатать страницу
Operating Manual -MX-206 Stereo Microphone Mixer

6. TYPICAL APPLICATIONS:

6.1 Small Sound
Reinforcement System:
In the setup shown
here, the MX-206 is used to mix
typical sound sources that
might be found in a small club,
meeting room, school theater or
similar environment. Six input
channels are used for micro-
phones for vocal or instrumen-
tal pickup. The Tape/CD In and
Tape Out provide feeds to and
from a cassette deck or other
recording/playback device for
playback of recorded material,
or for making a recording of the
mix. The main PA power am-
plifiers (or any additional
equalizers or electronic cross-
overs which may be used) are
fed from the Stereo Output con-
nectors, while a stage or con-
trol room monitor is fed from
the Mono Output.
Cassette Deck For
Stereo Record/Playback
Model MX-206
Stereo
Made I n USA
Outputs
100-120VAC
Phantom
Left
Right
50-60Hz 15W
Pwr.
6
Stereo
Main Speakers
Stereo Amplifier
Model MX-206
Made I n USA
100-120VAC
Phantom
Left
50-60Hz 15W
Pwr.
Amplifier
Lavalier Condenser Microphones
Ste reo Aux
Ch.6
Ch.5
Ch.4
Mono Output
-L-
PUSH
PUSH
PUSH
Pad
Pad
-R-
(-20dB)
-20dB
Aux
Aux
Transformer
Out
In
Balance d
Video, Telephone,
or Press-Box Interface
FTX- 1501
Ste reo Aux
Ch.6
Mono Output
-L -
PUSH
Ste reo
Outputs
Pad
-R-
Aux
Aux
(-20dB)
Transformer
Right
Out
In
Balanced
FTX- 1501
Ch.3
Ch.2
Ch.1
PUSH
PUSH
PUSH
Pad
Pad
Pad
Pad
(-20dB)
(-20dB)
(-20dB)
(-20dB)
Cassette Deck For
Stereo Record/Playback
Ch.5
Ch.4
Ch.3
Ch.2
Ch.1
PU SH
PUSH
PUSH
PUSH
PUSH
Pad
Pad
Pad
Pad
-20dB
(-20dB)
(-20dB)
(-20dB)
Monitor or
Control Room Speaker
6.2 Location Recording or
Broadcast Mixing:
In this setup the MX-206
is used to mix sources typically
found in location recording or
broadcast situations (mostly mi-
crophones). In this case, all six
inputs are microphones, as would
be used in a roundtable panel dis-
cussion. The Tape/CD Input re-
ceives the output of a cassette
deck or other playback device,
and the Tape Out provides a feed
to a cassette deck or other record-
ing device for making a record-
ing of the mix. For live remote
broadcast applications the trans-
former-balanced Mono Output
connector can feed a suitable
video, telephone or press-box in-
terface.
Pad
(-20dB)