Cypress CYPD3177 Руководство - Страница 2

Просмотреть онлайн или скачать pdf Руководство для Контроллер Cypress CYPD3177. Cypress CYPD3177 2 страницы. Barrel connector replacement (bcr) kit

EZ-PD BCR (CYPD3177) BLOCK DIGARAM

CC1/CC2

REPLACE YOUR BARREL POWER CONNECTOR WITH USB-C IN THREE, SIMPLE STEPS USING THE CY4533 EZ-PD BCR KIT

STEP 1:

Connect a USB-C power adapter (e.g. 30W

Apple USB-C power adapter) to the USB-C

receptacle of the CY4533 Kit. Observe the

Power LED (green color) as it comes ON.

GET STARTED NOW

Cypress Semiconductor Corporation

198 Champion Court, San Jose CA 95134

phone +1 408.943.2600 fax +1 408.943.6848

toll free +1 800.858.1810 (U.S. only) Press "1" to reach your local sales representative

002-26425 *A

SINK_FET_EN

SAFE_PWR_EN

VBUS_IN

FAULT

CYPD3177

VBUS_C

ILIM_COARSE

HPI/I2C

ILIM_FINE

Vmin Vmax

STEP 2:

Select the max V

voltage (5V, 9V, 12V, 15V, or

Bus

20V) using the rotary switch that matches the

voltage rating of the external load. The actual

voltage is determined by the connected USB-C

power adapter.

For more information about the EZ-PD BCR (CYPD3177) USB-C Port Controller and CY4533 EZ-PD BCR Kit,

visit: www.cypress.com/BCR, www.cypress.com/CY4533

For technical support, visit: www.cypress.com/support

Power Subsystem

SAFE_PWR

VBUS

SoC

STEP 3:

Measure DC-OUT on the power terminal with

a multi-meter to con rm that it matches the

voltage rating of the external load. Connect

the DC-OUT to the external load.

Power Input to your System