Cypress Envirosystems WGR Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Регистраторы данных Cypress Envirosystems WGR. Cypress Envirosystems WGR 14 страниц. Wireless gauge reader
Печатать страницу4.0 Setup
4.1
Components
The WGR comes with the following components:
WGR
Note: The WGR may come attached to the adapter, or separate, as defined by the part number.
Ensure the adapter is correctly sized for the gauge face. Custom adapters are shipped with WGRs, based
on the gauge information provided at the time of purchase.
4.2
Installation Overview
Step 1. Verify gauge functionality
1. Ensure that there are no blockages between WGR and gauge face (stickers, marks, etc.).
2. Use an appropriate cleaning agent, such as isopropyl alcohol to clean the gauge face Also, make sure
there are no deep scratches on the gauge window.
3. For liquid filled gauges, please make sure the gauge is filled completely.
Clean Gauge
Step 2. Verify WGR functionality
Turn on the WGR if it is in deep sleep (if the display is off).
1. Press "●" "●" "►" "◄" "●" sequence of buttons in succession, within 5 seconds.
2. The WGR display should say BOOT.
3. Once boot-up is complete, display should show 0.0 along with the ERROR icon.
Check functionality of the WGR.
1. Press "●" to take a reading.
2. A red light at the back of the WGR should flash, and the SAMPLE icon on the LCD will briefly flash.
3. The display will still most likely indicate an error (small ERROR icon), since the WGR has not yet been
calibrated for a gauge. This is normal behavior.
Cypress Envirosystems
Doc # 152-10101-01 Rev 1.2
Adapter
Dirty Gauges
WGR User Manual
Clamp
Page 8