ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Руководство по поддержке продукта - Страница 6

Просмотреть онлайн или скачать pdf Руководство по поддержке продукта для GPS ACR Electronics AEROFIX 406 GPS I P-ELT - REV E. ACR Electronics AEROFIX 406 GPS I P-ELT - REV E 17 страниц. Personal locator beacon fcc type approval is currently pending
Также для ACR Electronics AEROFIX 406 GPS I P-ELT - REV E: Руководство по поддержке продукта (17 страниц), Руководство по поддержке продукта (17 страниц), Руководство по поддержке продукта (17 страниц), Руководство по поддержке продукта (17 страниц), Руководство по поддержке продукта (14 страниц)

ACR Electronics AEROFIX 406 GPS I P-ELT - REV E Руководство по поддержке продукта
SECTION 4 - OPERATION
4.1
General
The AeroFix™ 406 GPS P-ELT models are designed to be manually deployed and activated. It is
only to be activated when all other means of self-rescue have been exhausted. Activation of the
P-ELT tells Search and Rescue who you are, where you are, and that you are facing a life threatening
situation.
Self Test Button
Green & Red LED
GPS Interface
4.2
AeroFix™ 406 GPS P-ELT Emergency Activation
4.2.1 Activation
To activate your P-ELT in an emergency situation, unfasten the antenna from the case or holster and
move it into the upright position (See figure 2). Lift the holster cover revealing the P-ELT keypad
(see figure 3). Depress the "self-test" and "GPS I" or "GPS I/O" buttons simultaneously for at least
1/2 second and less than 5 seconds (see figure 4). Your P-ELT is now activated. While transmitting
your emergency signal, the red LED will flash once every 2 seconds alerting you that your P-ELT is
activated. If GPS data is present in the P-ELT via the GPS I or GPS O the red LED will turn off and
the green LED will take over flashing once every 2 seconds.
4.2.2 Activation with GPS I (P/N 2799.2 and P/N 2799.4)
The AeroFix™ 406 GPS I and GPS I/O are equipped with a GPS Interface. Prior to activating your
P-ELT you can download your GPS LAT/LON into the P-ELT using an external GPS receiver and
the GPS Interface cable provided with the P-ELT. Once your external GPS has acquired good global
positioning data, press the GPS test button for at least ½ second and no longer than 5 seconds and
your GPS data will download into the P-ELT (for full instructions see Section 4.7.2). Once you
activate your P-ELT, your GPS coordinates are included in the distress signal. The green LED will
immediately start flashing every 2 seconds to alert you that your P-ELT is activated and transmitting
your GPS coordinates with the 406 MHz signal.
Figure 1. Key Pad Functions
(P/N 2799.4 shown)
5
GPS Test Button
-
GPS I (P/N 2799.2)
-
GPS I/O (P/N 2799.4)
Press both test and
GPS buttons together
for 1 second to
Off Button
activate the beacon in
an emergency
ON
Y1-03-0175 Rev. E