Dolphin DOLGDO318LIPW4 Инструкции - Страница 2

Просмотреть онлайн или скачать pdf Инструкции для Клавиатура Dolphin DOLGDO318LIPW4. Dolphin DOLGDO318LIPW4 4 страницы. Wireless garage door keypad 433 mhz dip switch

Печатать страницу

• The transmitter module built into the DOLGDO318LIPW4 is a 4-channel, rolling

code transmitter.

• As each transmitter has a unique serial number, no further action by the user is

required outside of programming the receiver to recognize the rolling code signal.

• Refer to your receiver's instruction for how to program the keypad signal into

your receiver.

• When the receiver instructions indicate the need to press the transmitter button,

you will need to enter your PIN into the keypad to initiate a transmission.

Changing the PIN

LED Guide:

Accessing a

specific channel

(Note: To reset the access code remove 9 volt battery form unit, Depress any key on

the keypad and wait 10 seconds before installing battery.)

PROGRAMMING THE DOLGDO318LIPW4

Default PIN: 1 2 3 4

#, #, PIN: 1 2 3 4, New PIN: __ __ __ __ , #

Indicator LED:

BLINK Code entered incorrectly

Keypad LED:

BLINK Access Code correct

#, PIN: __ __ __ __, Channel:1-4

Use this sequence when accessing a different

channel is desired for multi-channel receivers.

Example:

#, 5 5 5 5, 2 accesses channel 2

#, 5 5 5 5, 3 accesses channel 3

#, 5 5 5 5, 4 accesses channel 4

Entered into change access code mode