ASI 0390 Руководство по установке и обслуживанию - Страница 8

Просмотреть онлайн или скачать pdf Руководство по установке и обслуживанию для Диспенсер ASI 0390. ASI 0390 12 страниц. Soap dispenser
Также для ASI 0390: Руководство по установке и обслуживанию (16 страниц)

Печатать страницу

INSTALLATION

Install the soap fill hose onto the fill

port nipple ONLY AFTER THE FILL

PORT IS INSTALLED.

Cut the soap fill hose to the right

length as required by the installation

PRIOR TO INSTALLATION.

Soap fill hose is provided attached to

the soap tank coupling cap nipple.

DO NOT REMOVE.

See 0390-(n) installation for soap supply

tubes,

install

through

bushings in the soap tank cap to reach to

approximatly 1/2" (13) above the bottom

of the tank.

NOTE: The Multifeed Kit enables soap distribution for up to six (6) soap

dispensers simultaneously. When installing less than a full complement

of soap dispensers, make sure to insert and clamp the 5/16" dia x 1"

long (Ø8x25) plugs into the remaining empty holes provided.

1311070623 Rev G

the

locking

2019