Dolphin IBP-G4x16-3 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Компьютерное оборудование Dolphin IBP-G4x16-3. Dolphin IBP-G4x16-3 10 страниц.

ATX / microATX Cabinet mounting

The IBP-G4X16-3 is compliant to both microATX and ATC cabinets. Please refer to the figure below for dimensions and mounting

holes.

To maximize lifetime for the products and maintain the warranty, please honor the specified operating temperature for the Dolphin

PCIe uplink card and the installed PCIe device and make sure the proper air flow is present. Special care should be considered when

IBP-G4X16-3 is used in office type cabinets in combination with other high energy consuming PCIe devices, e.g., not active cooled

GPUs. Please consult the PCIe uplink card users guide and the installed PCIe devices users guide for details.

The IBP-G4X16-3 is shipped in an anti-static bag to prevent static electricity damage. The card should only be removed from the

bag after ensuring that anti-static precautions are taken. Static electricity from your clothes or work environment can

damage your PCI Express adapter card or your PC. Always wear a grounded anti-static wrist strap while opening the

expansion chassis and when the IBP-G4X16-3 is removed from the anti-static bag.

Unpack the IBP-G4X16-3 from the anti-static bag using proper anti-static procedures.

Step 2 – Install the IBP-G4X16-3 in a cabinet

The backplane can be installed in a ATX or MicroATX compliant Chassis with proper airflow to meet the requirements of

both the Dolphin uplink card and the installed Add-On cards.

Step 3 – Connect the Power Supply

The backplane must be powered from an ATX 24-Pin Power Supply. The power supply must provide enough power for

both the Dolphin uplink card and the PCIe adapter card installed.

Step 4 – Install the Dolphin PCIe uplink card

Configure and Install the Dolphin PCIe uplink card in one of the slots. Please refer to the Users Guide for the selected PCIe

card. The guides can be found at https://www.dolphinics.com/MX. To operate the IBP-G4X16-3 backplane, the selected

Dolphin target card must be running BMC firmware 2.7 or newer.

IBP-G4x16-3 User's Guide

Page 7