Cypress Semiconductor CY8CKIT-036 Краткое руководство по эксплуатации - Страница 4
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Компьютерное оборудование Cypress Semiconductor CY8CKIT-036. Cypress Semiconductor CY8CKIT-036 4 страницы.
Печатать страницу• Download and install PSoC Creator software from
www.cypress.com/go/CY8CKIT-036
• Download the application note (AN89346) pdf document
and the zip file (which includes the example project files).
Unzip the file and save the folder to your preferred directory
PSoC Programmer Software
Application Note
File path: Install_directory>:
\AN89346\HexFiles
\Thermal_Management_Project.hex
• Open the PSoC Programmer software
• Go to Start > All Programs > Cypress > PSoC Programmer
• Open the Thermal Management project hex file from the
downloaded application note folder
• Connect the PSoC Shield (CY8CKIT-019) to the PSoC
Pioneer Kit (CY8CKIT-042). Then, connect the Thermal
Management Kit (CY8CKIT-036) to the PSoC Shield
(CY8CKIT-019)
• Connect the 12-V/2-A power adapter to the power
jack J13 of the Thermal Management Kit (CY8CKIT-036)
For the latest information about this kit and to download kit software and hardware files,
visit
http://www.cypress.com/go/CY8CKIT-036
© 2013 Cypress Semiconductor Corporation. All rights reserved.
All trademarks or registered trademarks referenced herein are the properties of their respective owners.
Doc.#: 001-89888 Rev.**
QUICK START GUIDE
PS
C 4 USERS
O
1
• Connect the USB cable to the onboard programmer of
the PSoC 4 Pioneer Kit
• Place a jumper in position 1-2 of J9
3
• Select the parameters in the PSoC Programmer, as shown
in the figure above
• Click the 'Program' button and view the status message
indicating successful programming
5
• You will see the fans rotating at a speed set by the thermal
algorithms running in PSoC 4. You can vary the fan
speed by adjusting the potentiometer (on CY8CKIT-019)
• Refer to the application note (AN89346) documentation
to learn more about the projects, the thermal algorithms,
and the kit
Parameter settings in PSoC Programmer
Application Note
2
4
6