ASI JD MACDONALD 10-20201-2 Установка

Просмотреть онлайн или скачать pdf Установка для Сушилка ASI JD MACDONALD 10-20201-2. ASI JD MACDONALD 10-20201-2 2 страницы. High-speed hand dryer
Также для ASI JD MACDONALD 10-20201-2: Инструкция по эксплуатации и руководство по запчастям (15 страниц)

Печатать страницу

__________________________________________________________________________

www.asijdmacdonald.com.au

FEATURES

Roval™ Collection Surface Mounted Hand Dryer operates automatically from IR sensors that activate dryer when hands are placed in

sensor zone. Ready-status LED lights in hand drying chamber turn soothing blue when activated. Cabinet main panel shall be

seamless and shall have bowed front face, gently radiused edges and internal reinforcing ribs to provide added strength and

complimentary appearance for modern washroom aesthetics and shall be moulded in one piece of 3mm thick ABS. All exposed main

panel surfaces shall have a satin finish with appearance of stainless steel or white. Hand chamber, filter drawer and cabinet back

shall be black or white in same grade. All housing parts shall be permanently treated with antimicrobial Ag+ Ions. Cabinet back steel

plates mount flush against wall and shall have concealed pin-hex security screws to retain unit. Motor and heating element shall have

internal resetting automatic thermal protection. Fixed directional air nozzles shall be heavy duty, rust proof and tamper resistant. Air

intake slots shall not allow access to internal parts. Ceramic water evaporator plate shall be provided integral with cabinet styling. Drip

prevention tray shall be provided with drain port for optional waste line (not supplied) concealed mounted under filter drawer.

Concealed HEPA antibacterial triple filter (HEPA {H12}, Activated Charcoal and Anti-Microbial layers) will remove particles as small

as 0.3 micro-meters [0.3 μm (Ø 0.0001")] and shall prevent recycling of contaminated air. Circuitry shall have self-adjusting time-out

and fail-safe off protection controlled by a microprocessor that shall detect and reject false signals and shall automatically self-

calibrate to provide uniform sensitivity over its entire life span. Entire unit shall be internally electrically grounded. Complete Owner's

Manual & Installation Guide (OM & IG) shall be provided with each unit.

*We recommend changing the Super Filter every 6 months based on normal use (for dusty and extremely heavy use we recommend

changing the Super Filter every 3 months. The part number for the Super Filter is: 10-A0194

INSTALLATION

Electrical connection by cord & plug (as supplied). Can be direct wired by an electrician. Refer to Operating Instructions and Part

Manual for detailed instructions.

OPERATION

User activates dryer by placing hands into open hand chamber. LED's change colour from amber ready-status to soothing blue to

indicate operation. Directional air jets from top blow water droplets off hands onto evaporator plate. Dryer automatically shuts off after

time-out (Hold-On) when user removes hands from sensor zone or after 60 seconds if unit is purposefully kept operating for longer

than normal drying time (e.g. washroom experimentation, vandalism). Owner may choose to set heater on or off with concealed

switch for increased economy based upon 800 Watt operating reduction or may choose to vary/reduce heat output with concealed

control between 400 Watts and 800 Watts for user comfort level. Evaporator plate allows atomized droplets to return to vapour state

without dripping on floor or back wall behind and below unit. Drip tray prevents excessive waste water from draining onto floor under

unit in very heavy usage settings or in high-humidity environments. Security locking screw concealed under filter access drawer

prevents unauthorized tampering and protects asset. Triple-Filter element removes airborne solid particles and is changed manually

by owner on cycle determined by maintenance requirements.

FINISH

Unit is supplied in white or silver finish:

MODEL

10-20201-2

3mm thick moulded ABS plastic

10-20200-2

3mm thick moulded ABS plastic

ASI JD MacDonald reserves the right to, and does from time to

time, make changes and improvements in design and dimensions.

The photographs and line drawings of the products in this flyer are

representational only. All dimensions are in millimetres unless

otherwise stated.

freecall 1800 023 441

COVER

Tri-Umph

High-Speed Hand Dryer

Model No. 10-20200-2 or 10-20202-2

Date: February 2022

FINISH

White

Silver (Grey)