Cypress Semiconductor PSoC 4100S Краткое руководство по эксплуатации - Страница 2

Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Микроконтроллеры Cypress Semiconductor PSoC 4100S. Cypress Semiconductor PSoC 4100S 4 страницы.

Печатать страницу

• Touch left or right CapSense buttons to

decrease or increase the RGB LED brightness

level

How to open the kit case

The case houses an FR4 board called the PSoC 4100S Pioneer board (main board) and a Flex PCB

• Pull out the bottom case by inserting the nger

in the notch provided (A)

• Remove the bottom case by gradually moving

the nger along the edge of the bottom case (B)

Note: Refer to the Kit Guide for details on reassembling the kit case.

CY8CKIT-041-41XX QUICK START GUIDE

• To get started, download and install the

PSoC Creator

IDE, CY8CKIT-041-41XX

PSoC 4100S Pioneer Kit code examples,

documents and hardware design les from

www.cypress.com/CY8CKIT-041-41XX

For detaching the main board from the top case

• Hold the kit as shown in the gure and pull the

side wall outwards (C)

• Hold the USB connector and gently lift the board

upwards (D)

• The Flex PCB is permanently attached to the top

case. Do not attempt to separate the Flex PCB

from the top case