Cyrus DAC X+ Инструкции пользователя - Страница 7

Просмотреть онлайн или скачать pdf Инструкции пользователя для Медиаконвертер Cyrus DAC X+. Cyrus DAC X+ 17 страниц.

Cyrus DAC X+

RESTORING FACTORY SETTINGS

You can also restore all configuration options to the initial default settings that

were applied at the factory.

NOTE: This operation is not reversible.

To restore factory settings, disconnect mains power from the unit. Now re-

connect mains power while holding down the Standby key.

OPERATION (DAC X+)

Key to the front panel drawing (Fig.2a):

1. Standby key

2. Standby light

4. Display window

5. Setup adjust

6. Setup select

Switching On

The mains power to the DAC X+ should normally be left on unless left

unattended for a long period when the mains power at the wall socket should

be switched off or the product disconnected from the AC supply.

When power is applied, the STANDBY key a is used for power control. The

Standby light b shows red when the DAC X+ is in Standby and green when

operational.

Inputs may be selected from the front panel INPUT SELECT buttons i. As a

new input is selected the input name/number are displayed briefly. The main

display indication for input can be selected from the two options available

from the setup menu.

The factory default 'small input' display option will also identify the sample

rate of the selected source and indicate 'Invalid Audio Format' for program

material which the DAC X+ will not decode (such as multi-channel digital

sound from DVD players or satellite receivers).

Cyrus system remote controls

For convenience of operation, the DAC X+ will respond to CD system select

commands from a Cyrus amplifier or system remote control, switching on

each time the CD system is selected and switching off with power off

commands. If the DAC X+ is connected to a different input (TU, AUX or AV)

the remote response may be changed through the set-up menu to match the

connected input. Refer to the paragraph 'DAC X+ connected to:' in the

'Setting up the DAC X+' section to change the response.

User Instruction

9. Input select