EG Bali 350 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для Велосипед EG Bali 350. EG Bali 350 8 страниц.

This portion of owners manual is a supplement to the Bicycle owner's manual. This section pertains

to the features in the electric bicycle and how to care for them.

INSTALLATION INSTRUCTIONS

Unpack the bicycle from the box and cut all the ties that held the bicycle together during

shipping.

Turn the front suspension fork 180 degrees. If the fork cannot turn, loosen the screws holding

the handlebar stem and then turn the fork. Tighten the handlebar stem back after turning the

fork forward; such that the stem will protrude forward.

Install the handle bar onto the handlebar stem. An Allen key is supplied to install the handle

bar.

Remove the battery from the rack, so that it is easier to turn the bicycle upside down to install

the front wheel. To remove the battery, use the large keys insert them into the bottom key hole

and turn the key clockwise to release the latch holding the battery. While the key is turned,

gently slide the battery from the holder.

! WARNING: Please make sure that the saddle and the handle bar are installed properly

before turning the bicycle upside down to install the front wheel. Ensure the weight of the bike

does not bend the rear mudguard.

Turn the bicycle upside down such that the fork is facing upward.

Check the pattern of the tire such that when installed they will match the direction of the rear

tires.