BluePoint Fasteners BP-361N Руководство по эксплуатации - Страница 8
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Электроинструмент BluePoint Fasteners BP-361N. BluePoint Fasteners BP-361N 18 страниц.
Печатать страницуOPERATING INSTRUCTIONS
DAILY FUNCTION TEST
•
Always check the tool first to ensure
that it does not contain a strip of
loads or fasteners.
•
Test the tool by pressing the muzzle
completely on a hard surface and
pulling the trigger. You should hear
an audible click sound when the
trigger is pulled. Let up on the tool
and make sure the barrel returns to
the open position.
14
OPERATING THE BP361 TOOL
NEVER LOAD A FASTENER
WITH YOUR FINGER ON
THE TRIGGER
DO NOT USE EXCESSIVE
FORCE WHILE INSERTING A
FASTENER
1.
Check to make sure that the tool is
not loaded, and point it in a safe
direction.
2.
Keeping your finger off the trigger,
place the fastener in the muzzle,
with the tip of the fastener pointing
out, until the end is completely
inside the muzzle. STOP
immediately if excessive pressure is
needed. With your fingers off the
trigger, inspect the barrel to check
why the fastener is not entering
easily. DO NOT continue to use tool
unless the problem is corrected.
3.
With the tool pointing in a safe
direction and your fingers off the
trigger, insert the strip load
through the bottom of the handle
and push through until your fingers
touch the handle recess.
USE OF THE SINGLE-FASTENING TOOL
Insert the fastener until the washer
is held in the tool.
Adjust the driving power by turning
the regulating wheel.
1 =minimum power
2=medium power
3=maximum power
WARNING! Never cover or push back the end of the fastener
guide with the palm of your hand or any part of your body.
Load the cartridge strip narrow end
first by inserting it into the bottom
of the tool grip until flush. If the strip
has been partly used, pull it through
until a live cartridge is in the
chamber.
Before fastening, positioning the
tool perpendicular to the work
surface, press down and then pull
the trigger.
15